Spohn 738 Bedienungsanleitung PDF herunterladen

Spohn Performance, Inc.

494 E Lincoln Ave Myerstown, PA 17067

1-888-365-6064 www.spohn.net

Part #738 – “Pro-Drag” Front Coil Over Kit

1982-1992 GM F-Body

USE OF THIS PRODUCT IS ACCEPTANCE OF SELLER’S DISCLAIMER OF WARRANTY!

By their very nature, competition components are constantly pushed to their limits. While our components

are designed to withstand intense race conditions, it is impossible to control the quality of installation or

the varying conditions in which they are used. It is for this reason that absolutely no warranty or

guarantee is either written or implied. Neither the seller nor the manufacturer will be liable for any loss,

damage, or injury – direct or indirect – arising from the use of or inability to determine the use of any

product. Before using, the user should determine the suitability of the product for its intended use, and

the user shall assume all responsibility in connection therewith. Spohn Performance, Inc. makes no

guarantee as to the legality for any specific class. Spohn Performance, Inc. makes no claims, nor does it

intend its products to be used in street driven vehicles. Spohn Performance, Inc. reserves the right to

make changes in design or add to or improve on their product without incurring any obligation to install

the same on product previously manufactured. The Buyer agrees to indemnify and hold Spohn

Performance, Inc. harmless from any claim, action or demand arising out of or incident to the Buyer’s

installation or use of products purchased from Spohn Performance, Inc.

INSTRUCTIONS

1. Raise vehicle and support with stands. Remove both front wheels/tires.

2. Follow your service manual guidelines for removal of the stock front coil springs.

(Working with springs is dangerous and should only be performed by an experienced

mechanic).

3. With the stock front coil springs removed, support the a-arm with a jack.

4. Disconnect the top of the strut from the upper strut mount. Lower the a-arm until

you are able to let the top of the strut swing out of the wheel well.

5. Remove the strut mount retainers. Before doing this, draw a line around your

upper strut mounts. This will allow you to position your new upper strut mounts

correctly when we re-install them later.

6. Installing the threaded coil over sleeve on to the strut:

We want to note a few things about this. Many struts have a small ring spot welded

to the top of the strut housing, this will hinder the installation of the coil over sleeve.

If your strut has this ring you will need to remove it from the strut. This is done

easiest with the strut removed from the spindle. They are generally installed with

three small spot welds, simply take a punch and hammer and knock the ring off of

the strut housing, it will pop right off. Use a file to remove any sharp edges or weld

splatter from this area.

1 2

Spohn Performance, Inc 1

Inhaltsverzeichnis

Seite 1 - Spohn Performance, Inc

1 Spohn Performance, Inc. 494 E Lincoln Ave Myerstown, PA 17067 1-888-365-6064 www.spohn.net Part #738 – “Pro-Drag” Front Coil Over Kit 1982-19

Seite 2

2 Our research has shown that the o.d. of a thirdgen strut housing will vary from as small as 2.14” to as big as 2.20” depending on the brand of the

Kommentare zu diesen Handbüchern

Keine Kommentare

Spohn 738 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Spohn 738 herunter. Spohn 738 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Spohn 738