Spohn 736-B Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Spohn 736-B herunter. Spohn 736-B User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Spohn Performance, Inc.
494 E Lincoln Ave Myerstown, PA 17067
1-888-365-6064 www.spohn.net
Part# 736-B Adjustable Rear Coil Over Kit
1965-1970 Chevrolet B-Body & 1971-1996 GM B-Body
USE OF THIS PRODUCT IS ACCEPTANCE OF SELLER’S DISCLAIMER OF WARRANTY!
By their very nature, competition components are constantly pushed to their limits. While our components
are designed to withstand intense race conditions, it is impossible to control the quality of installation or
the varying conditions in which they are used. It is for this reason that absolutely no warranty or
guarantee is either written or implied. Neither the seller nor the manufacturer will be liable for any loss,
damage, or injury – direct or indirect – arising from the use of or inability to determine the use of any
product. Before using, the user should determine the suitability of the product for its intended use, and
the user shall assume all responsibility in connection therewith. Spohn Performance, Inc. makes no
guarantee as to the legality for any specific class. Spohn Performance, Inc. makes no claims, nor does it
intend its products to be used in street driven vehicles. Spohn Performance, Inc. reserves the right to
make changes in design or add to or improve on their product without incurring any obligation to install
the same on product previously manufactured. The Buyer agrees to indemnify and hold Spohn
Performance, Inc. harmless from any claim, action or demand arising out of or incident to the Buyer’s
installation or use of products purchased from Spohn Performance, Inc.
INSTRUCTIONS
Notice: Failure to lubricate the coil over threads with anti-seize or equivalent prior to adjusting ride height
will cause damage to the shock absorber and will void the QA1 shock warranty. All ride height
adjustments must be made with the vehicle weight completely unloaded from the suspension.
1. Follow the factory service manual to remove the stock rear shock absorbers
and coil springs.
2. Check the underside of the upper rear shock mounting location on the vehicle
for debris where the t-bars will sit. These areas must be free of any
undercoating, dirt, rust or other debris to ensure the t-bar will sit flat against
the sheet metal.
3. Remove the upper mount from the shock. Mount just the upper shock mount
with t-bar to the upper mounting area on the car using the supplied 5/16”
flange bolts and flanged lock nuts. Tighten to 20 ft./lbs.
4. Now thread the top of the shock shaft into the upper shock mount that is
mounted on the car. Turn the shock until the shock shaft is fully threaded into
the upper shock mount and the adjuster knob on the bottom of the shock is
facing rearward. Keep the jam nut loose.
5. With the spring seat turned all the way down on the shock you can access
and tighten the jam nut at the top of the shock shaft to secure the shock to
the top mount.
6. Mount the u-shaped lower shock mounting bracket onto the vehicle. Install
the 1/2” washers and lock nuts. The brackets will mount perpendicular to the
axle tube. Torque the stud to 50 ft./lbs.
7. Repeat steps 1-6 on the other side.
8. Place the vehicle on the ground and check vehicle ride height. Adjust the
spring seat adjuster nut up or down the threaded shock body to gain your
desired ride height. Be sure you have lubricated the shock body threads first.
Once ride height has been set tighten the jam rings against the spring seats
using the supplied spanner wrenches.
1
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1 - Spohn Performance, Inc

Spohn Performance, Inc. 494 E Lincoln Ave Myerstown, PA 170671-888-365-6064 www.spohn.netPart# 736-B Adjustable Rear Coil Over Kit1965-1970 Chevrol

Seite 2

9. Check around the shock and spring assembly and verify proper clearance for brake lines, cables and exhaust.10. Finally, the u-shaped lower shock mo

Verwandte Modelle: 736-A | 736-G |

Kommentare zu diesen Handbüchern

Keine Kommentare