Spohn MR-9302F Bedienungsanleitung PDF herunterladen

Spohn Performance, Inc.

494 E Lincoln Ave Myerstown, PA 17067

1-888-365-6064 www.spohn.net

Pinto Manual Steering Rack Kit

1993-2002 GM F-Body

USE OF THIS PRODUCT IS ACCEPTANCE OF SELLER’S DISCLAIMER OF WARRANTY!

By their very nature, competition components are constantly pushed to their limits. While our components are

designed to withstand intense race conditions, it is impossible to control the quality of installation or the varying

conditions in which they are used. It is for this reason that absolutely no warranty or guarantee is either written or

implied. Neither the seller or the manufacturer will be liable for any loss, damage, or injury – direct or indirect –

arising from the use of or inability to determine the use of any product. Before using, the user should determine

the suitability of the product for its intended use, and the user shall assume all responsibility in connection

therewith. Spohn Performance, Inc. makes no guarantee as to the legality for any specific class. Spohn

Performance, Inc. makes no claims, nor does it intend its products to be used in street driven vehicles. Spohn

Performance, Inc. reserves the right to make changes in design or add to or improve on their product without

incurring any obligation to install the same on product previously manufactured. The Buyer agrees to indemnify

and hold Spohn Performance, Inc. harmless from any claim, action or demand arising out of or incident to the

Buyer’s installation or use of products purchased from Spohn Performance, Inc.

Notice: Disconnect the vehicle’s battery before performing any welding!

INSTRUCTIONS

1. Lift car on jack stands and remove front tires

2. Remove 11mm bolt on steering column at firewall

3. Remove 11mm bolt at rack to steering shaft

4. Remove cotter pins from tie rod ends then remove the 15mm nuts

5. Separate the tie rods from the steering knuckle

6. Remove the power steering lines from the factory rack. You can remove the power

steering pump.

7. Remove the two bolts from the k-member that hold the rack in place.

8. Install the Spohn manual rack using the factory bolts on the k-member mounts.

If you have a Spohn k-member with #704-MRM mount installed, skip to

#10.

9. If you have the factory k-member or an aftermarket k-member with factory rack

mounts you will next need to bolt the ¼” plate to the driver’s side end of the manual

rack. Using the supplied gussets, weld the plate to your k-member. If you have the

factory k-member, you will need to extend the clearance notch in the k-member

towards the passenger’s side to properly clear the manual rack. If you have an

aftermarket k-member other than Spohn, you may need to modify or make your own

gussets to weld the plate fast. The parts we sent are universal. Warning: The

mounting plate must

be welded on, do not use this rack with just the two factory

mounts!

10. Install the bump-steer kit from the bottom of the spindle.

1 2

Spohn Performance, Inc 1

Inhaltsverzeichnis

Seite 1 - Spohn Performance, Inc

1 Spohn Performance, Inc. 494 E Lincoln Ave Myerstown, PA 17067 1-888-365-6064 www.spohn.net Pinto Manual Steering Rack Kit 1993-2002 GM F-Body

Seite 2

2 11. 1993-1997 Cars: Take the factory steering shaft to a vise and clamp the shaft where it slides in to the factory column. Hit the bottom rag j

Kommentare zu diesen Handbüchern

Keine Kommentare

Spohn MR-9302F Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Spohn MR-9302F herunter. Spohn MR-9302F User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Spohn MR-9302F